QC Lubricants
CAGE CODE 9Y364
7360 Milnor St Philadelphia, PA 19136
(215) 333-2000 Direct Line

Toll Free
With Extension: (800) 887-2436
For Technical Assistance: Dial Extension 203 for Stan Jakubowski
For Sales Assistance: Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn  ♦   Email Lindsay Romero


We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MIL-SPECS Products
Chemical.net
MSDS
Product Shelf Life Data
PDS and other Docs Boeing Specs McDonnell Douglas Specs

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries
 

 

 

Anderol

Anderol 555
ISO VG 100 SYNTHETIC COMPRESSOR OIL

Anderol

ANDEROL 555
ANDEROL 555 SYNTHETIC COMPRESSOR OIL (ISO VG 100)

Anderol 555 General Information:
ANDEROL 555 is an ISO 100 diester based synthetic compressor lubricant specifically designed to provide longterm lubrication in process gas compressors.

ANDEROL 555 TYPICAL PROPERTIES:
 

ANDEROL 555 SALES SPECIFICATIONS

PROPERTY

TEST METHOD

MIN

MAX

TYPICAL RESULTS

Anderol 555 Viscosity @ 40C, cSt

ASTM D-445

90.0

110

97

Anderol 555 Viscosity @ 100C, cSt

ASTM D-445

---

---

9.3

Anderol 555 Pour Point, C

ASTM D-97

-

-30

-35

Anderol 555 Flash Point, C

ASTM D-92

230

-

274

Anderol 555 Specific Gravity, 15.6C

ASTM D-4052B

0.95

0.97

0.96


ANDEROL 555 ADDITIONAL INFORMATION

Anderol 555 Autoignition Temperature, C

ASTM E-659

410

Anderol 555 Conradson Carbon Residue, %

ASTM D-189

0.02

Anderol 555 Evaporation, 22 hrs @ 99C, %

ASTM D-972

<1.0

Anderol 555 Copper Strip Corrosion, 3 hrs @ 100C

ASTM D-130

1A

Anderol 555 Demulsibility @ 54C, ml oil/water/emulsion (min.)

ASTM D-1401

39/38/3 (<60)

Anderol 555 Four-Ball Wear, 1200 rpm, 75C, 40 kg, 1 hr, mm

ASTM D-2266

0.8

 

APPLICATIONS

For cylinder and frame lubrication of reciprocating compressors and vacuum pumps using the following gases:
Air Carbon Dioxide (dry) Hydrogen Sulphide (dry) Propane
Butadiene Ethylene Natural Gas Synthesis Gas
Carbon Monoxide Helium Methane Sulphur Hexafluoride
Furnace (crack) Gas Hydrogen Nitrogen
Nominal Operating Range is 15C to 230C (5F to 445F)APPROVALS

ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 20 years of successful performance. They are field tested, approved or recommended by most major compressor manufacturers.
Should you have any questions regarding the suitability of ANDEROL 555 compressor lubricant for a specific manufacturer's model compressor, please check with us here at QC Lubricants.

ADVANTAGES

No metallic additives to interfere with catalytic processes

Fewer oil changes

Lower oil consumption

Reduces compressor maintenance

Eliminates lacquering and deposits

Greatly reduces fire and explosion hazard

Reduces energy consumption

Separates water condensate rapidly

ANDEROL 555 COMPATIBILITY

The following seals, paints, and plastics are recommended for use in contact with Anderol Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials, see the Compatibility Guide.
RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, and PBT.
NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, and ABS.

Anderol

Anderol