QC Lubricants
CAGE CODE 9Y364
7360 Milnor St. Philadelphia, PA 19136
(215) 333-4187
Direct Line

Toll Free
With Extension (800) 887-2436
For Technical Assistance:
Dial Extension 203 for Stan Jakubowski
For Sales:
Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn  ♦   Email Lindsay Romero


Home

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MSDS
Products Mil-Specs Product Shelf Life Data
PDS and other Docs Boeing Specs McDonnell Douglas
QC BLU DEF Diesel Exhaust Fluid

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries

 

 


advanced
Royco Lubricants

Royco 22MS

ROYCO 22MS

 Royco 22MS

HIGH LOAD CAPACITY WIDE TEMPERATURE RANGE

SYNTHETIC BASED GREASE

GENERAL INFORMATION

ROYCO 22MS is a smooth, gray - black colored synthetic oil based grease that is compounded with micro fine graphite and molybdenum disulfide for enhanced extreme pressure load carrying performance.

ROYCO 22MS is compounded with additives to provide corrosion resistance, oxidation stability, rust protection, and water washout resistance over extreme temperature ranges.Royco

TYPICAL PROPERTIES:

PROPERTIES

Penetration worked: 

Dropping Point F: 

Oil Separation 350 F/30 hrs %: 

Evaporation 350 F/ 22 hrs %: 

Load Wear Index:

Copper Corrosion ASTM: 

Water Resistance 105 F %:

Low Temp Torque -65 F Nm:

Starting: 

Running: 

 

ROYCO 22MS

285

600

1.5

3.75

 50 min

1B

 20 max

 

0.45

0.06

APPLICATIONS

ROYCO 22MS is recommended for use in applications where severe operating conditions may include temperatures as high as 450 F and as low as -65 F, low speeds, high loads, extreme pressures on sliding surfaces, splines, ball screws, and anti-friction bearings where the graphite and MOS2 may provide an added measure of protection against seizure in the event of inadequate lubrication due to extreme temperatures or mechanical spread out of the lubricant.

ADVANTAGES:
Wide temperature operating range
Designed for extreme loads

Corrosion resistance

 Excellent water washout characteristics

APPROVALS:

ROYCO 22MS meets all requirements and is qualified against MIL-SPEC: MIL-G-81827A.


Call us for pricing and availability, or with any questions. Our dedicated staff is eager to hear from you.
Royco 22MSBack to Royco Main Page


Royco and all associated logo's are registered trademarks of Anderol Inc.
Distributed by QCLubricants, Inc. All Rights Reserved.