Anderol 500
ISO VG 100 SYNTHETIC COMPRESSOR OIL
Anderol 500 GENERAL INFORMATION
Anderol 500 General Information:
ANDEROL 500 is an ISO 100 diester-based lubricant designed to provide high temperature and long-term
lubrication with minimal deposit formation.
ANDEROL 500 is rated H2 for use in food processing plant applications.
.Anderol 500 Properties:
Applications:
Cylinder and crankcase lubrication for reciprocating compressors and vacuum pumps for the following gases:
ANDEROL 500 may also be considered for other applications requiring an oxidation resistant lubricant. Nominal Operating Range is -15°C to 210°C (5°F to 410°F).
Advantages:
·Fewer oil changes
· Lower oil consumption
· Reduces compressor maintenance
· Eliminates lacquering and deposits
· Greatly reduces fire and explosion hazard
· Reduces energy consumption
· Separates water condensate rapidly
ANDEROL 500 Recommended - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
ANDEROL 500 NOT Recommended - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, ABS
This information has been obtained from the website of ANDEROL® Specialty Lubricants ANDEROL COMPANY®. ANDEROL is a reg. trademark of ANDEROL COMPANY. This information is furnished by them without warranty, representation, inducement, or license of any kind, except that it is accurate to the best of their knowledge or obtained from sources believed by ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only chemists or chemically qualified lab technicians should carry out tests. Before using any chemical, read its label and Material Safety Data Sheet.