preloaderlogo please wait

ECOLINK New II

 

ECOLINK New II

 

Ecolink

Environmentally Preferred Parts Cleaner Qualified to MIL PRF-680B, Type II

ECOLINK NEW II QT
ECOLINK NEW II GAL
ECOLINK NEW II 5 GAL
ECOLINK NEW II 15 GAL KEG
ECOLINK NEW II 55 GAL DRUM

ECOLINK NEW II Description
NEW II Environmentally Preferred Parts Cleaner is
an exceptional solvent degreaser formulated without
chlorinated solvents or other hazardous ingredients.
The base for NEW II is a unique high-grade
hydrocarbon that provides its strength, has no odor
and has a high flash point, allowing safe use on all
types of mechanical apparatus. With its high flash
point, NEW II provides an unprecedented degree of
user safety.
NEW II Environmentally Preferred Parts Cleaner is
strong enough to remove grease, fuel oil, carbon and
organic resins yet safe on most plastic and rubber
surfaces. Unlike other solvents, NEW II can be used
without extensive protective equipment. Common
sense chemical precautions required. (See MSDS).

ECOLINK NEW II Benefits
• Odorless
• Contains no water
• Fully evaporative, leaves no residue
• No hazardous ingredients as defined by the EPA
• Meets all requirements to MIL-PRF-680B, Type II
• Conforms to numerous corrosion test requirements
• High flashpoint

ECOLINK NEW II Applications
Use undiluted. NEW II works very well in a drum
mounted parts washer or any immersion tank. (Not
for use in high pressure enclosed cabinets.) You may
also spray or wipe NEW II on a surface to be
cleaned. Oil, dirt and carbon will flow off surface. If
additional cleaning is required, re-apply and agitate
with rag or brush. To speed evaporation, use
compressed air or wipe with a dry rag.

ECOLINK NEW II Safety and Handling Precautions
Always use with adequate ventilation. Rubber gloves are recommended. Treat as combustible liquid. Place rags in a metal sealable container after use to avoid possible spontaneous combustion. Keep container closed. Avoid excessive contact with fumes or liquid. Please read MSDS prior to use.