Description
NEW II Environmentally Preferred Parts Cleaner is
an
exceptional solvent degreaser formulated without
chlorinated solvents or other hazardous ingredients.
The
base for NEW II is a unique high-grade hydrocarbon that
provides its strength, has no odor and has a high flash
point, allowing safe use on all types of mechanical
apparatus.
With its high flash point, NEW II provides an
unprecedented degree of user safety.
NEW II
Environmentally Preferred Parts Cleaner is strong enough to
remove grease, fuel oil, carbon and organic resins, yet safe
on most plastic and rubber surfaces.
Unlike other solvents,
NEW II can be used without extensive protective equipment.
Common sense chemical precautions required. (See MSDS).
Benefits
• Odorless
• Contains no water
• Fully evaporative, leaves no residue
• No hazardous ingredients
as defined by the EPA
• Meets all requirements to
MIL-PRF-680B, Type II
• Conforms to numerous corrosion test
requirements
• High flashpoint
Applications
Use undiluted.
NEW II works very well in a drum mounted parts
washer or any immersion tank. (Not for use in high pressure
enclosed cabinets.)
You may also spray or wipe NEW II on a
surface to be cleaned.
Oil, dirt and carbon will flow off
surface. If additional cleaning is required, re-apply and
agitate with rag or brush. To speed evaporation, use
compressed air or wipe with a dry rag.
Safety and
Handling Precautions
Always use with adequate ventilation.
Rubber gloves are recommended. Treat as combustible liquid.
Place rags in a metal sealable container after use to avoid
possible spontaneous combustion. Keep container closed. Avoid
excessive contact with fumes or liquid. Please read MSDS prior
to use.
NEW II QT
NEW II GAL
NEW II 5 GAL
NEW II 15 GAL KEG
NEW II 55 GAL DRUM
Welcome! Thanks for visiting.
