preloaderlogo please wait

ANDEROL 465

Anderol 465

ANDEROL 465

SYNTHETIC EXTREME LOW-TEMP OIL
SYNTHETIC LUBRICATING OIL

 

ANDEROL® 465 GENERAL INFORMATION

 

ANDEROL® 465 as an ISO Grade 68 (nominal), synthetic diester-based lubricant that is formulated to offer extended lubrication over a wide temperature range, resist gumming and speed fluctuations, and minimize wear.

ANDEROL® 465 TYPICAL PROPERTIES
ANDEROL 465

ANDEROL® 465 SYNTHETIC LUBRICATING OIL APPLICATIONS
- Impregnating fluid for sintered metal bearings, parts, and wicks
- Office, computing, and accounting equipment
- Measuring and dispensing pumps and meters and General purpose medium viscosity lubricating oil
- Anti-friction bearings and Wire extrusion oil
- Mechanical spring and actuator mechanisms

ANDEROL® 465 ADVANTAGES
· Excellent oxidation resistance
· Reduces friction for low-wear rates
· Moderate load carrying
· Wide operating temperature range -35 to 270°F (-35 to 130°C)
· Excellent corrosion protection

ANDEROL® 465 COMPATIBILITY
The following seals, paints, and plastics are recommended for use in contact with Anderol Company Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials, see Anderol's "Compatibility Guide." RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, ABS

This information has been obtained from the website of ANDEROL® Specialty Lubricants ANDEROL COMPANY®. ANDEROL is a reg. trademark of ANDEROL COMPANY. This information is furnished by them without warranty, representation, inducement, or license of any kind, except that it is accurate to the best of their knowledge or obtained from sources believed by ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only chemists or chemically qualified lab technicians should carry out tests. Before using any chemical, read its label and Material Safety Data Sheet.