CHEVRON TURBINE OIL SYMBOL 2190 TEP
This turbine oil's benefits:
Turbine Oil Symbol 2190 TEP delivers value
- Long lubricant life because of selected base
stocks and additives.
pressure characteristics provide high
film strength to protect gears
and bearings engaged
in severe, heavy-duty service.
approved — Meets stringent
military specifications for Navy vessels and
- High viscosity index — Minimal viscosity change
broad operating temperature range enhances
lubricant film strength.
This turbine oil's features:
Chevron Turbine Oil Symbol 2190 TEP was
developed primarily as a circulating system oil for marine gear turbine
Chevron Turbine Oil Symbol 2190 TEP provides mild extreme
pressure protection as well as resistance to rust, oxidation, corrosion,
Chevron Turbine Oil Symbol 2190 TEP has outstanding
thermal and oxidation stability which allows it to withstand the high
temperatures found in turbine
bearing and gear lubrication.
inhibition prevents the buildup of foam in the sump tank with possible
vent pipe overflow.
Its excellent stability, high viscosity index, and
rust and corrosion inhibition assures high film strength lubrication for
gears and bearings, as well as rust and
corrosion protection. Together,
these qualities mean both long lubricant and equipment life.
This turbine oil's applications:
Chevron Turbine Oil Symbol 2190 TEP is recommended for use in marine
turbine reduction gears, where heavy tooth loading and shock loads are
The extreme pressure properties enable Chevron Turbine Oil
Symbol 2190 TEP to meet the requirements of MIL-PRF-17331J.
Do not filter through Fuller's Earth-type filtration systems since this
would deplete the additive package.
Do not use in high pressure systems
in the vicinity of flames, sparks and hot surfaces. Use only in well
ventilated areas. Keep container closed.
TYPICAL TEST DATA
cSt at 40°C
cSt at 100°C
|SUS at 100°F
|SUS at 210°F
|Color, ASTM D 1500
|Conradson Carbon Residue, mass %
|Sulfated Ash, wt %
|Corrosion, Copper Strip, 3 h at 100 C
|Acid Number, ASTM D 974, mg KOH/g
|Rust Preventive Test, ASTM D 665,
Procedure B, 48 h, Oil Water
Back to Chevron Products Main Page