Tectyl HPS high performance solvent, is designed for the dilution and removal of Tectyl solventborne and spray equipment.
coatings. Tectyl HPS can also be used for the pre-cleaning of ferrous and non-ferrous metal substrates.
QC Lubricants carries Tecyl HPS in 1 gallon
cans, 5 gallon cans, and in 55 gallon drums.
Tectyl HPS Laboratory Data
Tectyl HPS Typical Properties
|Tectyl HPS Flash, PMCC*, Minimum
|Tectyl HPS Density, Weight/Gallon @
|API Gravity @ 60/60
|Specific Gravity @ 60°F (15.6° C)
Tectyl HPS is formulated for use as specified.
For individual requirements, contact Daubert Chemical Company. Incorrect use of this solvent could affect film build, dry time, and the performance of Tectyl products. Tectyl HPS can be used on painted surfaces. Evaluate compatibility prior to use to determine if Tectyl
HPS will adversely affect paint. Daubert Chemical Company recommends that the ambient and product temperatures be 50 - 95°F (10 - 35°C) at time of application.
Adequate ventilation is required during use to
ensure against formation of a combustible atmosphere. THIS PRODUCT SHOULD
NOT BE EXPOSED TO IGNITION SOURCES SUCH AS FLARES, FLAMES, SPARKS,
EXCESSIVE HEAT, OR TORCHES. Refer to Daubert's Material Safety
Data Sheet for additional handling information.