QC Lubricants
CAGE CODE 9Y364
7360 Milnor St. Philadelphia, PA 19136
(215) 333-4187
Direct Line

Toll Free
With Extension (800) 887-2436
For Technical Assistance:
Dial Extension 203 for Stan Jakubowski
For Sales:
Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn  ♦   Email Lindsay Romero


Home

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 








 
QC BLU DEF Disel Exhaust Fluid

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries
 

     Tectyl

advanced

Tectyl 910E2

TECTYL® 910E2, Class I  CORROSION PREVENTATIVE
MEETS MILITARY SPECIFICATION
MIL-PRF-21260E

If you need additional information on Tectyl 910E2, or it's Military Specification MIL-PRF-21260E, please give us a call. Our dedicated team is eager to help.

TECTYL® 910E2

TECTYL® 910E2 is an internal combustion engine oil and corrosion preventive for all new and rebuilt engines. The film is oily and translucent. As a preservative oil, TECTYL® 910E2 protects engine parts during covered shipment and indoor storage. TECTYL® 910E2 is approved under Military Specification MIL-PRF-21260E, Grade 10W, QPL Reference Number MP-407, and SAE Standard J2361, PRI QPL Number PRI EO 0046.

Laboratory Data -  Typical Properties
Density, Weight/Gallon @ 77°F (25°C) -  7.3 ± 0.1 lbs./gallon
Specific Gravity @ 60°F (15.6°C) -  0.884
Recommended Dry Film Thickness over Metal Profile -  0.4 mils
Theoretical Coverage @ Recommended DFT- 4,010 sq. ft./gallon

Specification Limits

Typical Minimum Maximum
Tectyl 910E2 Flash, C.O.C. Finished Oil
Tectyl 910E2 API Gravity
Tectyl 910E2 Viscosity @100°C cST
Tectyl 910E2 Viscosity@ 40°C cST
Tectyl 910E2 Viscosity@ -25 °C CP
Tectyl 910E2 Viscosity Index
Tectyl 910E2 Pumpability @ -30 °C CP
Tectyl 910E2 Pour Point, °C
Tectyl 910E2 Stable Pour°C
Tectyl 910E2 Carbon (Ramsbottom)
Tectyl 910E2 Sulfated Ash
Tectyl 910E2 Sulfur (Finished Oil)
Tectyl 910E2 Phosphorous
Tectyl 910E2 Calcium
Tectyl 910E2 Barium
Tectyl 910E2 Zinc
Tectyl 910E2 Sodium
Tectyl 910E2 Nitrogen
Tectyl 910E2 Magnesium
Tectyl 910E2 Boron
Tectyl 910E2 Copper
Tectyl 910E2 Potassium
Tectyl 910E2 Chlorine
Tectyl 910E2 Silicon

 

212°C
28.63
7.30
45.77
5,458
121
13,400
-39
-42
1.27
1.20
0.64
0.112
0.276
0
0.125
0
0.09
0.016
0
0
0
0.011
0.0019
205°C
27.63
6.90
40.77
3,500
80
30,000


1.12
1.08
0.512
0.1008
0.2484
0
0.1125
0
0.081
0.01
0
0
0
0.01
0

29.63
7.70
50.77
7,000

60,000
-30
-30
1.42
1.44
0.768
0.1344
0.3312
<0.01
0.15
<0.01

<0.03
<0.01
<0.01
<0.01
<0.03
<0.01

Surface Preparation
The maximum performance of TECTYL 910E2 can be achieved only when the metal surfaces to be protected are clean, dry, and free of rust, oil, and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50 - 95°F (10 - 35°C) at the time of product application.


Application
TECTYL 910E2 is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contact Daubert Chemical Company. DO NOT THIN TECTYL 910E2. Incorrect thinning will affect film build, dry time and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50 - 95°F (10 - 35°C) at time of application. TECTYL 910E2 should be used as factory fill and break-in oil for all new and rebuilt engines. This is a completely operational oil for current production engines meeting the requirements of MIL-PRF-21260E and need not be changed until the first scheduled oil change specified by engine manufacturer. As a preservative coating, TECTYL 910E2 is used to protect engine parts during covered shipment and indoor storage. TECTYL 910E2 is compatible with lubricating oils qualified under MIL-PRF-21260E, MIL-PRF- 2104, and MIL-L-46152E.

Removal
TECTYL 910E2 can be removed with TECTYL HPS solvent borne thinner, vapor degreasing, hot alkaline wash, or low pressure steam. TECTYL 910E2 can be removed from fabrics by normal dry cleaning procedures. Avoid the use of chlorinated or highly aromatic solvents when removing from painted surfaces, as these solvents may adversely affect paint. Caution Refer to the Material Safety Data Sheet for health and safety instructions.