QC Lubricants
CAGE CODE 9Y364
7360 Milnor St. Philadelphia, PA 19136
(215) 333-4187
Direct Line

Toll Free
With Extension (800) 887-2436
For Technical Assistance:
Dial Extension 203 for Stan Jakubowski
For Sales:
Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn  ♦   Email Lindsay Romero


Home

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

Products
Mil-Specs
MSDS
PDS and Other Docs
Product Shelf Life

QC BLU DEF Diesel Exhaust Fluid

 

advanced

Mobilube HD Plus 80W-90

Mobilube HD Plus 80W-90

Extra High Performance Commercial Gear Lubricant

 

Product Description

Mobilube HD Plus 80W-90 and 85W-140 are extra high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for performance in heavy-duty commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected. They provide excellent chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and have demonstrated good rust protection resulting from water contamination and wet conditions. They are recommended by ExxonMobil for applications where API GL-5 and MT-1 service is required. Mobilube HD Plus 80W-90 and 85W-140 share common formulations with Esso Gear Oil GX 80W-90 and 85W-140.

 

Features and Benefits

Today's heavy equipment applications place higher performance demands on drive train lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant. Mobilube HD Plus gear lubricants are engineered to meet these challenges. The key benefits include:

Features Advantages and Potential Benefits
Excellent thermal stability and resistance to high temperature oxidation Extended gear and bearing life due to minimal deposits and longer seal life
Good protection against low speed/high torque wear and against high speed scoring Increased load carrying capability and reduced operating costs
Excellent rust, staining, and corrosion protection Reduced wear and longer component life
Effective low temperature lubrication Reduced wear and ease of start-up
Wide multipurpose capability Reduced number of gear lubricants to simplify inventory and minimize misapplication
Good resistance to foaming Maintains film strength for effective lubrication
Compatible with typical automotive seals and gaskets Minimum leakage and reduced contamination

 

Applications

      Recommended by ExxonMobil for use in:

  • Heavy-duty manual transmissions, axles, and final drives requiring API GL-5 and MT-1 level performance
  • On-highway light and heavy-duty trucks, busses, vans, and cars
  • Off-highway industries including: construction, mining, quarrying, and agriculture
  • Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail
  • Initial fill, top-off, and refill of enclosed commercial gearing in manual or semiautomatic transmissions where gear lubricants are recommended including drive axles and final drives
  • Not recommended for applications requiring API GL-4 Level performance
  • Not intended for transmissions for which engine oil or automatic transmission fluids are recommended

Specifications and Approvals

Mobilube HD Plus Gear Oil meets or exceeds the requirements of the following industry specifications: 80W-90 85W-140
API GL-5 X X
API MT-1 X X
SAE J2360 X X
SCANIA STO-1:0 X X

Mobilube HD Plus Gear Oil has the following builder approvals: 80W-90 85W-140
Mack GO-J X X

Mobilube HD Plus Gear Oil is of the following quality level, but not approved: 80W-90 85W-140
MIL-PRF-2105E X X

Typical Properties

Mobilube HD Plus  
SAE Grade 80W-90
Viscosity, ASTM D 445  
cSt @ 40șC 139
cSt @ 100șC 14.5
Viscosity Index, ASTM D 2270 103
Pour Point, șC, ASTM D 97 -27
Flash Point, șC, ASTM D 92 210
Density @ 15șC kg/l, ASTM D 4052 0.895

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design, and Mobilube HD Plus are trademarks of Exxon Mobil Corporation, or one of its subsidiaries. 2-2011 

Copyright © 2001-2015 Exxon Mobil Corporation. All rights reserved.

 

 

back to Exxonmobile main page