QC Lubricants
CAGE CODE 9Y364
7360 Milnor St. Philadelphia, PA 19136
(215) 333-4187
Direct Line

Toll Free
With Extension (800) 887-2436
For Technical Assistance:
Dial Extension 203 for Stan Jakubowski
For Sales:
Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn  ♦   Email Lindsay Romero


Home

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

Products
Mil-Specs
MSDS
PDS and Other Docs
Product Shelf Life

QC BLU DEF Diesel Exhaust Fluid

 

advanced

MOBIL 1 SYN ATF



Mobil 1 Synthetic ATF

Advanced Synthetic Automatic Transmission Fluid

Product Description

Mobil 1 Synthetic ATF is a multi-vehicle, fully synthetic fluid designed to meet the demanding requirements of modern passenger vehicles. 

Features and Potential Benefits

Mobil 1 Synthetic ATF outperforms conventional ATFs and helps to provide outstanding resistance to oil breakdown and deposits. The inherently high viscosity index and stability of Mobil 1 Synthetic ATF helps to protect against thermal breakdown at high operating temperatures, while still providing outstanding performance at ambient temperatures as low as -54 C. Further, it helps to improve overall transmission durability and cleanliness. Key features and potential benefits include:


Features Advantages and Potential Benefits
Enhanced, long-term frictional properties Helps to improve and extend transmission efficiency, smooth shifting performance and fuel economy
Exceptional thermal and oxidation stability Keeps transmissions clean to help provide outstanding performance even under severe driving conditions
Outstanding film-strength and anti-wear properties Significant wear reduction which can contribute to long transmission life
Excellent low-temperature fluidity Helps to provide prompt and reliable lubrication at ambient temperatures down to -54 C
Exceptional shear stability Viscosity retention even under some of the severest heavy duty, high temperature operating conditions
Compatible with mineral ATF fluids and all common seal materials Reduced concern in top-off emergencies and excellent leakage control

Applications

  • Mobil 1 Synthetic ATF is a multi-vehicle formula recommended for use in modern high performance automobiles, SUV's, SUT's, vans and other light trucks
  • Recommended by ExxonMobil for use in applications requiring Dexron III , Ford Mercon and Mercon V performance levels
  • Recommended by ExxonMobil for use in applications specifying the off-highway power transmission requirements of Allison C-4

Specifications and Approvals

Mobil 1 Synthetic ATF meets or exceeds the requirements of:
JASO 1-A
Ford Mercon V
According to ExxonMobil, Mobil 1 Synthetic ATF  is of the following quality level:
Allison C-4
General Motors Dexron IIIH
General Motors Dexron IIIG
General Motors Dexron IIE
General Motors Dexron IID
General Motors Dexron II
General Motors Dexron
Ford Mercon
Voith H55.6335.3X
MAN 339 V1
Volvo 97340
Volvo 97341

Typical Properties

Mobil 1 Synthetic ATF  
Viscosity, cSt (ASTM D445)  
@ 40 C 36.3
@ 100 C 7.4
Viscosity Index 176
Brookfield Viscosity, cP (ASTM D2983)  
@ -40 C 10,040
Pour Point, C (ASTM D97) -51
Flash Point, C (ASTM D92) 220
Density @15.6 C g/ml (ASTM D4052) 0.846
Color Red

 

Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries. 

Copyright 2001-2014 Exxon Mobil Corporation. All rights reserved.

back to Exxonmobile main page