preloaderlogo Welcome! Thanks for visiting.

Shell Tellus S2 V

Shell Tellus S2 V

Shell Tellus S2 V

HVI Premium Hydraulic Oil
Formerly known as Shell Tellus T

Shell Tellus S2 V

 

Tellus S2 V
HVI Premium Hydraulic Oil

Tellus S2 V Product Description:
Tellus S2 V provides premium performance, anti-wear hydraulic oil which incorporate a special viscosity index improver additive to enhance the viscosity/temperature characteristics.

Tellus S2 V is available in six ISO viscosity grades 15 through 100. These oils are blended with a carefully selected viscosity index (VI) improver in severely hydroprocessed Group II base Oil To give a high VI without excessive loss of viscosity from mechanical shearing. Tellus S2 V, therefore exhibit less change in viscosity with temperature than conventional hydraulic oils. In addition, Tellus S2 V is compounded to give anti-wear performance, oxidation resistance and protect against rust and corrosion.

Tellus S2 V Applications:
Hydraulic and fluid power transmission systems subjected to wide variations in temperature or where low viscosity change with fluctuating temperature is required. Certain critical hydraulic systems can only tolerate small variations in viscosity with fluctuating temperature if efficiency and responsiveness are to be maintained.

Hydraulic oils, such as Tellus S2 V, which exhibit multigrade viscosity characteristics may be used to particular advantage in these circumstances.

• hydraulic oil systems, particularly those that are subject to a wide variation in ambient and system operating temperatures
• firetrucks and fireboats
• airport emergency vehicles
• mobile hydraulically-operated equipment
• electrical service equipment (cherry pickers)


Tellus S2 V Performance Features:
Very low viscosity variation with temperature Special viscosity index technology minimizes the oil's variation in viscosity with changes in temperature and provides good pumpability at low temperatures. These features are particularly beneficial in hydraulic applications subjected to extremes of temperature.

• superior anti-wear protection
• exceptional shear stability
• effective anti-chatter performance
• excellent oxidation stability
• outstanding protection against rust and corrosion
• non-foaming
• rapid air separation
• high dielectric strength


Tellus S2 V High shear stability:
The 'VI' improver is highly resistant to mechanical stress. The maintenance of 'stay-in-grade' characteristics ensures effective lubrication and long oil life.
Outstanding anti-wear performance Proven anti-wear additives are effective in all operating conditions, including low and severe duty, high load situations.


Tellus S2 V Excellent filterability:
Minimal tendency to cause filter blockage in the presence of contaminants such as water and calcium. Oxidation resistant
Resist the formation of acidic products and sludge, even at high working temperatures.


Tellus S2 V Corrosion protection:
Powerful inhibitors provide long term protection against corrosion of both ferrous and non-ferrous metals. Rapid air release and anti-foam properties provide air release without excessive foaming.


Tellus S2 V Compatibility:
The anti-wear additive technology used in Tellus S2 V is based upon zinc which, although ideal for most hydraulic pumps, should not be used in those of older design containing silverplated components. Shell Tellus Oils R should be used for these applications.


Tellus S2 V Seal & Paint Compatibility:
Tellus S2 V are compatible with all seal materials and paints normally specified for use with mineral oils.


Tellus S2 V Health & Safety
Tellus S2 V are unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
For further guidance on Product Health & Safety refer to the appropriate Shell Product Safety Data Sheet.


Protect the Environment:
Take used Oil To an authorized collection point. Do not discharge into drains, soil or water. S0041WPW.00E 0896

 


Shell Tellus S2 V

Shell says of their products, "Whatever your industry and however specialized your equipment, Shell’s products and services are designed to add value to your operation. Discover how using the right lubricant can bring you substantial savings by helping to maximize equipment efficiency, prolong component life and reduce downtime.