QC LubricantsCAGE CODE 9Y364
7360 Milnor St. Philadelphia, PA 19136
(215) 333-4187 Direct Line
Toll Free With Extension (800) 887-2436
For Technical Assistance: Dial Extension 203 for Stan Jakubowski
For Sales: Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn ♦ Email Lindsay Romero
We actively supply a comprehensive line of MIL-SPEC and commercial lubricants.
Shell Diala Oils are electrical insulating fluids, for use in electrical
systems where rapid heat transmission and high oxidation stability are
Typical Physical Characteristics
Shell Diala S2 ZX-A Oils are primarily intended for use in:
Highly resistant to oxidative degradation
Resists the formation of oxidation products that can reduce the ability of the oil to insulate and cool electrical windings
Rapid heat transfer properties
Shell Diala Oil A meets the ANSI/ASTM/NEMA Type I requirements without the addition of an oxidation inhibitor.
Health & Safety:
Shell Diala S2 ZX-A Oils are unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained.
For further guidance on Product Health & Safety refer to the appropriate Shell Product Safety Data Sheet
The critical electrical properties of Shell Diala S2 ZX-A Oils are easily compromised by minute concentrations of contaminants. Typically encountered contaminants include moisture, particulates, fibres and surfactants. Therefore, it is imperative that electrical insulating oils be kept clean and dry.
It is strongly recommended that storage containers be
dedicated for electrical service and include air-tight seals. It is
further recommended that electrical insulating oils be stored indoors in