QC Lubricants
CAGE CODE 9Y364
7360 Milnor St. Philadelphia, PA 19136
(215) 333-4187 Direct Line

Toll Free
With Extension (800) 887-2436
For Technical Assistance:
Dial Extension 203 for Stan Jakubowski
For Sales:
Dial Extension 211 for Lu Ann Quinn or 224 for Lindsay Romero
Email Lu Ann Quinn  ♦   Email Lindsay Romero


Home

We actively supply a comprehensive line of MIL-SPEC  and commercial lubricants.

 

MSDS
Mil-Specs
Products
Product Shelf Life Data
PDS and other Docs Boeing Specs McDonnell Douglas Specs
QC BLU DEF Diesel Exhaust 

Fluid

ExxonMobile
Castrol
Shell
Valvoline
Anderol
LHB Industries

 


advanced

Shell Gadus S2 U1000 2

Formerly known as Shell Darina SD 2


Shell Gadus S2 U1000 2

Typical properties of Shell Gadus S2 U1000 2

Shell Gadus S2 U1000 2

Property

Shell Gadus S2 U1000 2 Product Code

5 Gal Pails and 14 oz. tubes


5 Gal Pails and 14 oz. tubes

Shell Gadus S2 U1000 2 Thickener Type

Bentonite Clay

Shell Gadus S2 U1000 2 Appearance

Brown, Smooth

Shell Gadus S2 U1000 2 Viscosity:

@ 40C, cSt

1000

@ 100C, cSt

90

Shell Gadus S2 U1000 2 Penetration, dmm

Shell Gadus S2 U1000 2 Worked, 60X

280

Shell Gadus S2 U1000 2 Dropping Point, F

500+

Shell Gadus S2 U1000 2 Copper Corrosion

1b

Shell Gadus S2 U1000 2 Rust Test, Distilled Water

Pass

Shell Gadus S2 U1000 2 Oil Separation, wt%

< 3

Shell Gadus S2 U1000 2 Water Washout, wt% loss @175F

< 3

Shell Gadus S2 U1000 2 Water Spray-Off, wt%

< 10

Shell Gadus S2 U1000 2 Timken, OK Load, lbs

40

Shell Gadus S2 U1000 2 Weld Point, kgf

250

Shell Gadus S2 U1000 2 Four-Ball Wear, mm 1 hr, 75C, 1200 rpm, 40 kgf

0.6

Shell Gadus S2 U1000 2 Product Description

Gadus S2 U1000 2 are multipurpose, non-soap greases. They give excellent lubrication for extended time periods, in wet or dry applications, and over a wide range of temperatures. They are also formulated to provide extreme pressure (EP) characteristics.

Shell Gadus S2 U1000 2 are based on a non-melting bentonite clay thickener system. Due to the inert nature of the clay, these greases are suitable for applications where the lubricant is exposed to contaminants such as water and chemicals found in many industrial applications including chemical plants and paper mills. These greases are not recommended for use in centralized lubrication systems.

Applications

Excellent for applications in the following environments:

  1. industrial grease-lubricated machinery at temperatures up to 250F (350F with frequent lubrication)

  2. ball, roller, and sleeve bearings, as well as sliding surfaces and grease lubricated gears

  3. wet and heavily loaded applications

  4. chemical plants and paper mills, where grease is exposed to very wet conditions

  5. mining and process plants, where crushers, screens and kilns are operated at high temperatures

Features/Benefits

  1. non-melting

  2. excellent resistance to water washout

  3. good load carrying capability

  4. good resistance to rust and corrosion

Handling & Safety Information For information on the safe handling and use of this product, refer to its Material Safety Data Sheet.

AeroshellBack to Gadus Main Page